[. . . ] [. . . ] (If you need help with this, see "Operator Panels" in your on-line User's Guide. Lower the printer onto the auxiliary tray, aligning the holes/plug on the bottom of the printer on the pins/connector on the tray. If it isn't there, check to be sure that the connection between the printer and Tray 2 is secure, then reprint and recheck the MenuMap. X AUTOFEED To set the printer to switch to Tray 2 when Tray 1 is empty: Printers with Operator Panel Set AUTOTRAY on in the Print Menu. [. . . ] [. . . ]